Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives
The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

1. A. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
2. B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
3. C. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
4. D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

Correct Answer: B

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

1. A. If the D3940 module is imported in managed state that allows volume provisioning.
2. B. If there Is a logical interconnect created based on the 12Gb SAS switches.
3. C. If the D3940 storage module is property licensed through HPE OneView interface.
4. D. If there is at least one ISCSI network configured that will provide access to the module.

Correct Answer: A

Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased 50 HPE.
ProLiant DK385 Gen10 Plus v2. They plan to manage the new systems using HPE OneView as well. What should the customer do to manage rack system using HPE OneView?

1. A. add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.
2. B. connect the rack system to an IPDU and add the IPDU to the HP
3. C. OneView instance that is used for HPE synergy management.
4. D. Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.
5. E. Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.

Correct Answer: A

Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

1. A. Pause flood protection
2. B. Loop protection
3. C. LLDP tagging
4. D. Storm control

Correct Answer: D

Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?

1. A. Disable deduplication for this volume at the array level
2. B. Remove the offline disks using array management tools
3. C. Install and configure MPIO on me Windows system
4. D. Remove the offline disks using Windows Disk Management

Correct Answer: C