An administrator is implementing DCNM so that events are triggered when monitored traffic exceeds the configured present utili zation threshold. The requirement is to configuration a maximum limit of 39860437 bytes that applies directly to the statistics collected as a ratio of the total link capacity. Which DCNM performance monitoring configuration parameter must be implemented to achieve this result?

1. A. Absolution Values
2. B. Baseline
3. C. Utill%
4. D. Per port Monitoring

Correct Answer: A

An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the shell of the NX-OS?

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: B

An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?

1. A. The FCNS database must be disabled in the fabric.
2. B. A port channel must be configured to the upstream switch.
3. C. All switches in the fabric must be Cisco MDS switches.
4. D. NPIV must be enabled on the upstream switch.

Correct Answer: D
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/int/nxos/cli_i

A network administrator must configure an extra keyring in Cisco UCS Manager. The key must provide a high level of encryption and secure authentication when users use the web interface. Which configuration command set must be applied to meet these requirements?

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: C
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Admin-Managem “cipher-suite-mode secure” is invalid command.
“Cipher-suite-mode high” is valid command. “tls-protocol tls1-2” is invalid command. “Ssl-protocol tls1-2” is valid command.

An engineer changed a configuration and must perform a rollback. Which statement applies to a Cisco Nexus 5600 Series switch?

1. A. Errors are skipped when an atomic rollback type is triggered.
2. B. A user who is assigned to the network-operator user role can perform a rollback.
3. C. The configuration rollback functionality is disabled when FCoE is enabled.
4. D. A system checkpoint is generated automatically when the running configuration is saved to NVRAM.

Correct Answer: C
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/system_management/503_n1_1/ cisco_n5k_system_mgmt_cg_rel_503_n1_1_chapter11.pdf https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.cisco.com/c/en/us/td/docs/switches/
datacenter/nexus5000/sw/system_management/503_n1_1/ cisco_n5k_system_mgmt_cg_rel_503_n1_1_chapter11.pdf&ved=2ahUKEwjQ8ubTuK3xAhWm3jgGHZ9gB 0oQFjAAegQIBRAC&usg=AOvVaw2j0nnvXiChAoVooxX2Qx0g