An engineer is implementing an import operation in Cisco UCS Manager. What is the impact of performing this operation?

1. A. A configuration can be imported from a higher release to a lower release.
2. B. Information can be modified on the management plane only.
3. C. Only a configuration file that was exported from the same Cisco UCS Manager can be imported.
4. D. An import operation can be scheduled.

Correct Answer: B
The import function is available for all configuration, system configuration, and logical configuration files. You can perform an import while the system is up and running. An import operation modifies information on the management plane only. Some modifications caused by an import operation, such as a change to a vNIC assigned to a server, can cause a server reboot or other operations that disrupt traffic.
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration

Refer to the exhibit.


An engineer is creating a SPAN session to send a copy of all the Fabric-A VSAN 11 traffic on NSK_1 to the monitoring laptop. The configurator that is presented has already been applied to Cisco UCS Manager. Which action complétés the configuration?

1. A. Activate a NetFlow monitoring session
2. B. Create a SAN traffic rnonitoring session
3. C. Set VLAN 11 as the traffic destination
4. D. Select VSAN 11 as the source of traffic.

Correct Answer: C

A DevOps engineer must implement a bash script to query a REST API and return the available methods. Which code snippet completes the script?

1. A. DELETE
2. B. TRACE
3. C. POST
4. D. OPTIONS

Correct Answer: C

Refer to the exhibit.

What is configured as a result of running these commands?

1. A. reverse lookup for outbound packets
2. B. strict unicast RPF
3. C. loose unicast RPF
4. D. IP Source Guard

Correct Answer: B
https://tools.cisco.com/security/center/resources/unicast_reverse_path_forwarding
The ip verify unicast source reachable-via rx command enables Unicast RPF in strict mode. To enable loose mode, administrators can use the any option to enforce the requirement that the source IP address for a packet must appear in the routing table.

An engineer must configure a Cisco MDS 9000 Series Switch for traffic analysis from the storage array. The storage array is connected to the interface fc2/1 in VSAN 10 and the traffic analyzer to fc4/2. The capture file must include ingress and egress traffic between the switch and the storage array. Also, only traffic in VSAN 10 must be captured. Which configuration set meets these requirements?
A)

B)

C)

D)

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: A