CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available? (Choose two.)

1. A. Allow HTTP traffic only before authentication and block all the traffic.
2. B. Allow all the traffic before authentication and intercept HTTPS only.
3. C. Allow HTTPs traffic only before authentication and block all other traffic.
4. D. Allow all the traffic before authentication and intercept HTTP only.
5. E. Allow SNMP traffic only before authentication and block all the traffic.

Correct Answer: CD
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/mse/8-0/CMX_Connect_Engage_Visitor_Connect/Guide/Cisco_CMX_Connect_Engage_Config_Guide_VC/CMX_Facebook_Wi-Fi.html

Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime Infrastructure network management software? (Choose two.)

1. A. HTTPS
2. B. Telnet
3. C. SOAP
4. D. SSH
5. E. NMSP

Correct Answer: AE

A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the Trusted Root Certification Authorities store on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?

1. A. There is an IEEE invalid 802.1X authentication policy on the authentication server.
2. B. The user Active Directory account is locked out after several failed attempts.
3. C. There is an invalid 802.1X authentication policy on the authenticator.
4. D. The laptop has not received a valid IP address from the wireless controller.

Correct Answer: C

Refer to the exhibit. An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)

1. A. Configure the certificate, WLAN, and radio interface on WGB.
2. B. Configure the certificate on the WLC.
3. C. Configure WLAN to authenticate using ISE.
4. D. Configure the access point with the root certificate from ISE.
5. E. Configure WGB as a network device in ISE.
6. F. Configure a policy on ISE to allow devices to connect that validate the certificate.

Correct Answer: ACF

What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?

1. A. 10 seconds
2. B. 15 seconds
3. C. 30 seconds
4. D. 60 seconds

Correct Answer: B
Reference: https://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.html