A virtual server is defined using a source address based persistence profile. The last five connections were A, B, C, A, C . Given the conditions shown in the graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection?

1. A. 10.10.20.1:80
2. B. 10.10.20.2:80
3. C. 10.10.20.3:80
4. D. 10.10.20.4:80
5. E. 10.10.20.5:80

Correct Answer: B

A BIG-IP Administrator wants to add the ASM Module to an HA pair of BIG-IP devices. The BIG-IP Administrator has already installed a new Add-On License on both devices in the HA pair. What should the BIG-IP Administrator do next to use the module?

1. A. Provision the new module on both BIG-IP device's
2. B. Synchronize both BIG-IP devices
3. C. Reboot both BIG-IP devices
4. D. Reactivate the Licenses on both BIG IP devices

Correct Answer: A

Refer to the exhibit.

A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During troubleshooting, the administrator learns that the connection between the BIG-IP system and server is NOT set up correctly.
What should the administrator do to solve this issue?

1. A. Disable Address Translation
2. B. Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet of the servers
3. C. Set Address Translation to SNAT and configure a specific translation address
4. D. Set Address Translation to SNAT and have self-IP configured in the same subnet of servers

Correct Answer: C
The status of the pool can be seen that the members are all up, indicating that the network from F5 to the server is no problem, so there is no need to configure selfip on the same subnet. The monitor is normal but the access is not normal, you have to consider the problem of snat, you can configure automap or configure snat and specify snat ip.

One of the two members of a device group has been decommissioned. The BIG-IP Administrator tries to delete the device group, but is unsuccessful.
Prior to removing the device group, which action should be performed?

1. A. Disable the device group
2. B. Remove all members from the device group
3. C. Remove the decommissioned device from the device group
4. D. Make sure all members of the device group are in sync

Correct Answer: B

A site has assigned the ICMP monitor to all nodes and a custom monitor, based on the HTTP template, to a pool of web servers. The HTTP based monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes. All other settings are default. What is the status of the monitor is working in all cases?

1. A. All pool members are up since the HTTPbased monitor is successful.
2. B. All pool members are down since the ICMPbased monitor is failing in some cases.
3. C. The pool members whose nodes are failing the ICMPbased monitor will be marked disabled.
4. D. The pool members whose nodes are failing the ICMPbased monitor will be marked unavailable.

Correct Answer: D