- (Exam Topic 4)
Refer to the exhibit.

Which interface is chosen to forward traffic to the host at 192.168.0.55?

1. A. GigabitEthernet0
2. B. GigabitEthernet0/1
3. C. Null0
4. D. GigabitEthernet0/3

Correct Answer: B

- (Exam Topic 4)
Refer to the exhibit.

The image server and client A are running an application that transfers an extremely high volume of data between the two. An engineer is configuring a dedicated circuit between R1 and R2. Which set of commands must the engineer apply to the routers so that only traffic between the image server and client A is forces to use the new circuit?

1. A. R1(config)#ip route 10.10.13.10 255.255.255.255 10.10.10.6R2(config)#ip route 192.168.0.100 255.255.255.255 10.10.10.5
2. B. R1(config)#ip route 10.10.13.10 255.255.255.128 10.10.10.6R2(config)#lp route 192.168.0.100 255.255.255.0 10.10.10.5
3. C. R1(config)#ip route 10.10.13.10 255.255.255.252 10.10.10.6R2(config)#tp route 192.168.0.100 255.255.255.252 10.10.10.5
4. D. R1(config)#ip route 10.10.13.10 255.255.255.255 10.10.10.2R2(config)#ip route 192.168.0.100 255.255.255.255 10.10.10.1

Correct Answer: D

- (Exam Topic 3)
Refer to the exhibit.

Which plan must be Implemented to ensure optimal QoS marking practices on this network?

1. A. As traffic traverses MLS1 remark the traffic, but trust all markings at the access layer.
2. B. Trust the IP phone markings on SW1 and mark traffic entering SW2 at SW2.
3. C. Remark traffic as it traverses R1 and trust all markings at the access layer.
4. D. As traffic enters from the access layer on SW1 and SW2. trust all traffic markings.

Correct Answer: C

- (Exam Topic 4)
Which encryption method is used by WPA3?

1. A. PSK
2. B. TKIP
3. C. SAE
4. D. AES

Correct Answer: D

- (Exam Topic 4)
Refer to the exhibit.

The network engineer is configuring a new WLAN and is told to use a setup password for authentication instead of the RADIUS servers. Which additional set of tasks must the engineer perform to complete the configuration?

1. A. Disable PMF Enable PSK Enable 802.1x
2. B. Select WPA Policy Enable CCKM Enable PSK
3. C. Select WPA Policy Select WPA2 Policy Enable FT PSK
4. D. Select WPA2 Policy Disable PMF Enable PSK

Correct Answer: D