- (Exam Topic 3)
A network engineer is installing an IPv6-only capable device. The client has requested that the device IP address be reachable only from the internal network. Which type of IPv6 address must the engineer assign?

1. A. unique local address
2. B. link-local address
3. C. aggregatable global address
4. D. IPv4-compatible IPv6 address

Correct Answer: B

- (Exam Topic 1)
Which QoS Profile is selected in the GUI when configuring a voice over WLAN deployment?

1. A. Bronze
2. B. Platinum
3. C. Silver
4. D. Gold

Correct Answer: B
Reference:
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81831-qos-wlc-lap.html
Cisco Unified Wireless Network solution WLANs support four levels of QoS: Platinum/Voice, Gold/Video, Silver/Best Effort (default), and Bronze/Background.

- (Exam Topic 1)
What must be considered when using 802:11 ta?

1. A. It is compatible with 802 lib- and 802 11-compliant wireless devices
2. B. It is used in place of 802 11b/g when many nonoverlapping channels are required
3. C. It is susceptible to interference from 2 4 GHz devices such as microwave ovens.
4. D. It is chosen over 802 11b/g when a lower-cost solution is necessary

Correct Answer: A

- (Exam Topic 3)
OSPF must be configured between routers R1 and R2. Which OSPF configuration must be applied to router R1 to avoid a DR/BDR election?

1. A. router ospf 1network 192.168.1.1 0.0.0.0 area 0 interface e1/1ip address 192.168.1.1 255.255.255.252ip ospf network broadcast
2. B. router ospf 1network 192.168.1.1 0.0.0.0 area 0 interface e1/1ip address 192.168.1.1 255.255.255.252ip ospf network point-to-point
3. C. router ospf 1network 192.168.1.1 0.0.0.0 area 0 interface e1/1ip address 192.168.1.1 255.255.255.252ip ospf cost 0
4. D. router ospf 1network 192.168.1.1 0.0.0.0 area 0hello interval 15 interface e1/1Ip address 192.168.1.1 255.255.255.252

Correct Answer: B

- (Exam Topic 3)
A Cisco engineer is configuring a factory-default router with these three passwords:
• The user EXEC password for console access is p4ssw0rd1
• The user EXEC password for Telnet access is s3cr3t2
• The password for privileged EXEC mode is pnv4t3p4ss
Which command sequence must the engineer configured
A)

B)

C)

D)

1. A. Option A
2. B. Option B
3. C. Option C
4. D. Option D

Correct Answer: B