- (Exam Topic 1)
Which of the following MAPI application-specific optimizations can be performed by Steelhead appliances?
Correct Answer:
E
- (Exam Topic 3)
Which ethernet network cable type can you use when connecting your SteelHead appliance to a switch when all ports are hard coded to 100/FULL?
Correct Answer:
C
To connect a Steelhead appliance to a switch use a straight-through cable. Note: Make sure that you have connected your cables as follows: References:
Steelhead Appliance Installation and Configuration Guide, Version 7.0.3, May 2012, page 46 https://support.riverbed.com/bin/support/download?did=614
- (Exam Topic 1)
When performing datastore synchronization between two Steelhead appliances, segments of data are exchanged between them. Which interfaces can be used for datastore synchronization? (Select 2)
Correct Answer:
BC
- (Exam Topic 3)
Simplified Routing is recommended when:
Correct Answer:
A
Enabling simplified routing eliminates the need to add static routes when the steelhead appliance is in a different subnet from the client and the server.
Note: Simplified routing changes the process used to select the destination Ethernet address for packets transmitted from in-path interfaces. Simplified routing collects the IP address for the next hop MAC address from each packet it receives to address traffic. With simplified routing, can use either the WAN or LAN-side device as a default gateway. The steelhead appliance learns the right gateway to use by watching where the switch or router sends the traffic, and by associating the next-hop Ethernet addresses with IP addresses.
References:
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=mmr_kc-0127411
- (Exam Topic 2)
To run RSP which Steelhead appliance ports must to be connected to your network? (Select 2)
Correct Answer:
AD